Installation Instructions for 34HW–35HW IDH Max Mortise Locks
BEST ACCESS SYSTEMS
Indianapolis, Indiana
Installing the lock
10
10 Install mounting plates
1 Insert the outside mounting plate through the door
and mortise case.
2 Position the inside mounting plate opposite the
outside mounting plate and screw them securely in
place.
Caution: Do not overtighten the mounting plate
screws. Overtightening may compress the mortise
cavity and bind the locking mechanism.
11 Install cylinder and mortise case
faceplate
Note: Install the cylinder for EEL and EEU function locks
only.
1 Thread the concealed cylinder into the mortise case so
that the groove around the cylinder head is even with
the door surface. Adjust the cylinder depth plus or
minus one (1) turn so that the core, when installed in
the cylinder, is flush with the outer surface of the trim.
Caution: A malfunction can occur if the cylinder is
threaded in too far.
2 Secure the cylinder in the mortise case with the case
set screw.
3 Secure the mortise case faceplate to the mortise case
with the faceplate mounting screws.
4 Check the cylinder and lock for proper operation.
Note: You do not need to change the positions of the
DIP switches on the control electronics circuit board
located in the inside escutcheon.
■ By default, s witches 1 through 5 are set to ON. These
switches are for possible future applications.
■ By default, switches 6 and 7 are set to ON for
automatic baud rate detection. This setting lets you
determine the baud rate for communication between
the lock’s control electronics circuit board and the
panel interface module by setting DIP switches on the
panel interface circuit board. (See page 21.)
■ Switch 8 is set to ON for locks with an insertion-type
magnetic stripe card reader; it is set to OFF for locks
with any other type of reader.
Figure 10 Installing the mounting plates
Outside of door
Outside
mounting plate
Inside
mounting
plate
Figure 11 Installing the cylinder and mortise case
faceplate
Outside of door
Concealed
cylinder
Case set screw
(inside mortise case)
Mortise
case
faceplate
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais