BEST ACCESS SYSTEMS 35HW Manual de Serviço descarregar pdf (Página 168)

Installation Instructions for 34HW–35HW IDH Max Mortise Locks

BEST ACCESS SYSTEMS

Indianapolis, Indiana

Preparing the door and door jamb

1 Mark centerlines

Note: If the door is a fabricated hollow metal door,

determine whether it is properly reinforced to support

the lock. If door reinforcement is not adequate, consult

the door manufacturer for information on proper

reinforcement. For dimensions for preparing metal

doors, see the W13 Template—Installation

Specifications for 34HW–35HW IDH Max Mortise

Locks.

1 On the door, measure and mark the height of the

centerline of the knob/lever from the floor (38″

recommended). On both sides of the door, on the

door’s edge, and on the door jamb, mark the

horizontal centerline of the lock 1 1/2″ above the

centerline of the knob/lever.

Note: If the door is a LH or RH door, mark the inside of

the door. If the door is a LHRB or RHRB door, mark the

outside of the door.

2 On the door’s edge and door jamb, mark the vertical

centerline of the lock.

3 Measure and mark the backset (2 3/4″ standard) from

the vertical centerline on the door’s edge. On both

sides of the door, mark the vertical centerline of the

lock.

4 On the door jamb, mark the horizontal centerline of

the strike 3/8″ above the horizontal centerline of the

lock.

2 Position template and mark drill points

1 Cut the W15 Template—Installation Template for

34HW–35HW IDH Max Mortise Locks along the dashed

lines and align the horizontal and vertical arrows with

the marked centerlines on the door.

2 Tape the template to the door.

3 Center punch the necessary drill points. Refer to the

instructions on the template.

Figure 1 Marking the centerlines

Door jamb

Door

Vert. centerline

of lock

Horz. centerline

of lock

Horz. centerline

of knob/lever

(38″ from floor

recommended)

Vert. centerline

of door’s edge

Horz. centerline

of strike

Vert. centerline

of strike

Figure 2 Positioning the template

Installation template

Horizontal centerline

of lock

Horizontal centerline

of knob/lever

Vertical centerline

of lock

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 227 228

Comentários a estes Manuais

Sem comentários

BEST ACCESS SYSTEMS 35HW Manual de Serviço Página 168

Comentários a estes Manuais

Manuais e produtos relacionados com Controladores de porta de segurança BEST ACCESS SYSTEMS 35HW